High-Power Programmable Sinewave BLDC Motor Controller
High-Power Programmable Sinewave BLDC Motor Controller
Fardriver ND72360 / ND84360 / ND96360 High-Power Programmable Sinewave BLDC Motor Controller (72V / 84V / 96V – 170A DC / 360A Phase) – Peak 8000W Vector Drive for E-Scooters, E-Bikes & Sur-Ron Build Upgrades
Unlock the true torque and top-end speed of your electric powertrain with the Fardriver ND-Series Programmable FOC Vector Sinewave Controller. Available in 72V (ND72360), 84V (ND84360), and 96V (ND96360) variants, this high-performance motor controller pushes up to 170A continuous DC line current and 360A peak phase current, supplying up to 8000W of raw output to demanding hub and mid-drive brushless motors.
Built around a high-speed 32-bit microprocessor and encapsulated in a rugged die-cast aluminum heat-sink chassis with an IP67 waterproof rating, the Fardriver ND-series provides ultra-smooth acceleration, quiet field-oriented vector control (FOC), and high-efficiency flux weakening (field weakening) for extended top speeds. Tune throttle response, current limits, regenerative braking, and motor parameters on the fly using the FarDriver mobile app (iOS & Android) via Bluetooth or a PC USB interface.
🚀 Key High-Performance Features
-
High-Power Vector Sinewave Architecture: Delivers whisper-quiet operation, linear throttle response, and minimal heat generation compared to square-wave controllers.
-
Up to 8000W Peak Output: Handles up to 170A continuous DC battery current and 360A peak phase current to eliminate acceleration hesitation and tackle steep inclines.
-
Bluetooth & PC Wireless Programmability: Fine-tune throttle curves, flux weakening, phase current, max speed limits, and regen braking intensity directly from your smartphone or laptop.
-
IP67 All-Weather Enclosure: Fully sealed aluminum substrate casing protects internal MOSFETs from water immersion, mud splatter, trail dust, and vibration.
-
Advanced Flux Weakening (Field Weakening): Boosts motor RPM beyond baseline nominal voltage limits to increase top-speed performance on flat terrain.
-
Self-Learning Motor Auto-Tune: Built-in automatic Hall sensor angle detection simplifies initial setup with QS Motor, Sur-Ron, and custom BLDC powertrains.
📊 Technical Specifications Matrix
Electric Moped Motor Controller ND72360 ND84360 ND96360
| Specification Parameter | Fardriver ND Series Performance Specifications |
| Brand / Manufacturer | Nanjing Fardriver Technology |
| Model Variants | ND72360 (72V) / ND84360 (84V) / ND96360 (96V) |
| Operating Voltage Ranges | 72V Nominal (48V–88V) / 84V Nominal / 96V Nominal (Up to 115V Max) |
| Maximum Battery Current (DC) | 170A – 190A DC |
| Maximum Phase Current | 360A Peak |
| Maximum Peak Wattage | 8,000 Watts (8kW) |
| Control Logic Type | FOC (Field Oriented Control) Sine-Wave Vector |
| Waterproof Rating | IP67 Fully Sealed |
| Programming Interface | Bluetooth (FarDriver App for iOS/Android) & USB Cable |
| Supported Motor Compatibility | 3,000W – 5,000W Continuous BLDC Hub & Mid-Drive Motors |
| Physical Dimensions | 189 mm x 119 mm x 65 mm (7.4" L x 4.7" W x 2.5" H) |
| Unit Net Weight | Approx. 1,800 g – 2,100 g (4.0 lbs) |
| Hazardous Chemical Registry | High-concerned chemical: None |
⚙️ Wiring & Tuning Instructions
-
Mounting: Secure the aluminum heat-sink body against a clean metal surface on your vehicle frame to maximize passive thermal dissipation.
-
Wiring Alignment: Connect heavy-gauge battery leads (B+ / B-) and 3-phase motor wires (U, V, W) securely using ring terminals. Ensure correct Hall sensor pinout alignment.
-
App Setup & Self-Learning: Supply logic power, open the FarDriver App via Bluetooth, select your voltage parameter, and run the automated Self-Learning Routine to detect motor angle offset before road testing.
📦 Package Contents
-
1 x Fardriver ND-Series Sinewave Controller (Choice of ND72360, ND84360, or ND96360)
-
1 x Bluetooth Transceiver Module
-
1 x Main Wiring Harness Cable Assembly
Upgrade your EV build with high-efficiency sinewave control. Select your voltage model below, click Add to Cart, and unlock ultimate speed and torque today!
Combo:
1 piece Controller (Random Color)
1 piece Bluetooth module for Cell Phone
1 piece Wiring
1 piece Software(Will be sent by Email)
Key Features
1). All the raw materials are imported, using high-performance Moss tube
2). With the aluminum substrate scheme, the Moss tube is laid on the aluminum substrate and then placed on the PCB board
3). Small in size
4). High efficiency, low temperature rise, small running current
5). With self-learning function, excellent commonality
6). The app is compatible with Android and Apple
7). With flux weakening function.(The product does not contain magnetism)
ND72360
1. Model Number: ND72360
2. Max. Bus Current: 170A
3. Max. Phase Current: 360A
4. Working Voltage: 48V/60V/72V
5. Peak Voltage: 88V
6. Compatible Motor Power: 2000W-4000W
7. Size: 190mm*121mm*60.2mm
ND84360
1. Model Number: ND84360
2. Max. Bus Current: 170A
3. Max. Phase Current: 360A
4. Working Voltage: 48V/60V/72V/84V
5. Peak Voltage: 100V
6. Compatible Motor Power: 2000W-4000W
7. Size: 190mm*121mm*60.2mm
ND96360
1. Model Number: ND96360
2. Max. Bus Current: 170A
3. Max. Phase Current: 360A
4. Working Voltage: 48V/60V/72V/84V/96V
5. Peak voltage: 117V
6. Compatible Motor Power: 2000W-4000W
7. Size: 190mm*121mm*60.2mm
P.S.
The controller colors are blue and black, randomly sent.
Details
This product is crafted with quality materials to ensure durability and performance. Designed with your convenience in mind, it seamlessly fits into your everyday life.
Shipping & Returns
We strive to process and ship all orders in a timely manner, working diligently to ensure that your items are on their way to you as soon as possible.
We are committed to ensuring a positive shopping experience for all our customers. If for any reason you wish to return an item, we invite you to reach out to our team for assistance, and we will evaluate every return request with care and consideration.
